High Pressure Hydrogen Gas Booster DLE 2-1

  • Maximator high pressure hydrogen gas booster DLE 2-1 is suitable for the oil free compression of hydrogen
  • Working pressure up to 40 bar
  • Single stage, single acting
  • Small dimension
  • Price attractive solution
Add to compare

High pressure hydrogen gas booster DLE 2-1

  • The Maximator gas boosters’ operating principle is similar to a pressure intensifier. A large air piston is charged with low pressure (air piston) and works on a small area with high pressure (high pressure piston).
  • The Maximator high pressure gas boosters are suitable for the oil free compression of gases and air.
  • Maximator boosters can be switched on and off automatically through air pilot switches, contact gauges or external control devices.

Features

  • Pressure regulation via manual pressure regulator or pneumatically actuated valve
  • Operation with compressed air allows use in explosion-proof areas
  • Gas booster automatically stops operating upon reaching pre-selected final pressure
  • Gas booster restarts automatically to compensate leaks
  • No power consumption during long pressure holding periods
  • No heat generation during pressure holding period
  • Easy installation and trouble-free handling of gas boosters
  • Low maintenance thanks to reliable, easy-to-install devices
  • Effective cooling of the high pressure cylinders through integrated exhaust air cooling
  • Working pressure up to 40 bar
  • Flow: 150 lN/min (5.3 SCFM) at inlet pressure of 3 bar (116 psi) outlet pressure of 6 bar (87 psi)
  • Air drive pressure of 6 bar (87 psi)
  • High flow rate
  • Less pulsation

Working principle

  • Single stage
  • Single acting

Maximator_Gas Booster_2-1

Performance graphs for DLE 2-1 at different drive pressure are shown below.

Hydrogen gas booster DLE 2-1 Graphical result Drive pressure 4 bar

 

Hydrogen gas booster DLE 2-1

 

Hydrogen gas booster DLE 2-1 Graphical result Drive pressure 8 bar

Materials

High pressure hydrogen gas booster DLE 2-1 has been manufactured using different materials as mentioned below

  • Seal: PTFE, FKM
  • Compressor Head: 3.1645
  • HP Cylinder: 3.3206
  • HP Piston: 1.4404
  • Fittings: 1.4404
  • Balls: 1.4034
  • Springs: 1.4310

Benefits

  • Single stage, single acting
  • Small dimension
  • Price attractive solution
  • Easy installation and trouble-free handling of gas boosters
  • Low maintenance

Options

  • Inert gas service standard: DLE 2-1(-GG)
  • Oxygen service: DLE 2-1-GG-S
  • Co2 service: DLE 2-1-GG-C
  • In / Outlet – 1″NPT / 3/4″ NPT: DLE 2-1-NN

Application areas

  • Hydrogen compression
  • Testing applications
  • Pilot filling stations

Contact us

  • Contact us and tell us about your requirements. We will identify the suitable gas booster that provide the performance and safety you expect.
Weight15.3 kg
Dimensions42.9 × 18.1 × 27.2 cm
Max Pressure (in bar)

Compressor Type

Manufacturing Readiness (MRL)

Technology Readiness (TRL)

High Pressure Hydrogen Gas Booster DLE 5-2

Data sheet

Your inquiry will be sent directly to the right person within the vendor organization. Send your inquiry today!

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Maximator GmbH

    As an internationally leading company specialized in high-pressure technology, Maximator develops high-performance products and solutions for a variety of uses and applications in the field of high pressure testing and production equipment, hydraulics and pneumatics. Maximator has many years of experience with components, power units and test systems especially for hydrogen applications Many components for the development of this future technology are exposed to extreme stresses. Maximator meets this challenge with innovative high pressure test technology for hydrogen components such as valves, pipes or CGH vessels. We can carry out all legally prescribed testing on pressure bearing components with our test technology: from individual acceptance to type approval testing. We also offer gas control technology for hydrogen applications - approved effective and reliable technology for automotive manufacturers and suppliers.

    Scroll to Top