by Maximator GmbH

Cup Type Line Filters

  • Filters fluid at maximum pressure of 1550 bar in a hydrogen system.
  • Working temprature range from -252 °C to 350 °C.
  • In cup type line filters, Larger particles do not clog the fine filter (cascade filtration).
  • Filter elements are available in a variety of sizes, including 5, 30, and 56 microns, and may be simply replaced.
Add to compare

Cup Type Line Filters

  • Maximator cup type filters of the 1,550 bar series filter solids from gases and fluids up to a maximum pressure of 1,550 bar.
  • Thus, sensitive components are protected. Filter elements may be easily replaced on site.
  • Filters are supplied complete with collars and glands.
  • The indicated micron size is ensured by structural measures.
  • Maximator Cup-Type Line Filters are used when maximum filtration surface area and a single micron size element is preferred.
  • This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes.
  • Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced.
  • Filters are rated for temperatures -423°F to 660°F (-252°C to 350°C). All line filters come with glands and collars.

Key features

  • Filters fluids at maximum pressure of 1550
  • Easily replacable
  • Larger particles do not clog the fine filter (cascade filtration)
  • Working temprature range from -252 °C to 350 °C
  • The gland, the collar and the body is made from single material 316 L (1.4404)

Application areas

  • General hydrogen use
  • Medium pressure panels
  • Medium pressure fluid handling systems
  • Testing application

Contact us

  • Maximator can provide technical drawings upon request. Contact us and tell us about your requirements. We will identify the products that provide the performance and safety you expect.
Max Pressure (in bar)

Max Ambient Temperature (in °C)

Min Ambient Temperature (in °C)

Technology Readiness (TRL)

Manufacturing Readiness (MRL)

Cup Type Line Filters datasheet

Product datasheet

Your inquiry will be sent directly to the right person within the vendor organization. Send your inquiry today!

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Maximator GmbH

    As an internationally leading company specialized in high-pressure technology, Maximator develops high-performance products and solutions for a variety of uses and applications in the field of high pressure testing and production equipment, hydraulics and pneumatics. Maximator has many years of experience with components, power units and test systems especially for hydrogen applications Many components for the development of this future technology are exposed to extreme stresses. Maximator meets this challenge with innovative high pressure test technology for hydrogen components such as valves, pipes or CGH vessels. We can carry out all legally prescribed testing on pressure bearing components with our test technology: from individual acceptance to type approval testing. We also offer gas control technology for hydrogen applications - approved effective and reliable technology for automotive manufacturers and suppliers.

    Scroll to Top