Air Actuated Valves
Air Flow Control Valves
Angle Seat Valves
Ball Valves
Butterfly Valves
Cathode Isolation Valves
Check Valves
Coaxial Valves
Control Valves
Cryogenic Valves
Diaphragm Valves
Flow Control Valves
Globe Valves
Hydrogen Back Pressure Regulators
Hydrogen Filter Regulators
Hydrogen Fuel Cell Pressure Regulators
Hydrogen Pressure Reducing Valves
Hydrogen Pressure Relief Valves
Hydrogen Pressure Solenoid Valves
Hydrogen Tank Valves
Needle Valves
On Tank Valves
Plunger Valves
Process Automation Solenoid Valves
Proportional Valves
Safety Valves
Shut-Off Valves
Hydrogen Flow Meter micro Hy-Orifice™ HP (6mm Bore 0.003 to 34.8 g/sec, 1000 Bar)
- Working pressure of 1000 bar
- High pressure version with small 6 mm bore
- For flow rates between 0.003 g/sec to 34.8 g/sec
- View datasheet to select the perfect hydrogen flow meter for your flow rate
- If your flow rate is not mentioned, contact GM Flow for further advice
Hydrogen Flow Meter micro Hy-Orifice™ HP (6mm)
- Built entirely from 316L SS, micro Hy-Orifice provides a tough, accurate, corrosion and erosion-resistant flow measurement technique, which is easy and safe to operate, even by inexperienced personnel.
- Utilises MP Autoclave end connections and offering a changeable flow range by offering 0.5 to 4 mm orifice sizes.
- micro Hy-OrificeTM offers a quick, easy, and compact installation with a flow computer, differential and flowing pressure, and temperature transmitters already included as options, ready to measure any flow rate within the ranges quoted.
- Hydrogen flow meter micro Hy-Orifice includes differential pressure, flowing pressure and flowing temperature ports , built into the meter body.
- By varying the orifice size, differential pressure, and flowing pressure transmitter ranges, micro Hy-Orifice™ HP can measure from as low as 0.003 g/sec (@ 5 Bar) up to 34.8 g/sec of Hydrogen (@1000 bar). micro Hy-Orifice™ complements our micro Hy-Cone™ and Integra-Cone™ flow meters by providing a very low flow range device for extreme pressure applications.
Key features
- MP Autoclave Threaded Connections
- 10:1 Turndown ratio
- Changeable flow range
- Mono-Block Design - no Welding
- Integrated Pressure, Differential Pressure & Temperature Instruments (as options)
- Corrosion and Erosion Resistant Materials
- Simple Operation and Field Inspection/Maintenance
- Reliable by Design
- Rated to 1000 bar Working Pressure
- 316L Stainless Steel as standard
Application areas
- Electrolyser performance monitoring
- Fuel cell consumption
- Hydrogen fueling
Contact us
- GM Flow has the right hydrogen flow meter for you. Fill out the contact vendor form to contact the vendor.
| Max Pressure (in bar) | 1000 |
| Accuracy (in %) | 0.5 |
| Manufacturing Readiness (MRL) | 9 |
| Technology Readiness (TRL) | 9 |
GM Flow Measurement Services
GM Flow are experts in measurement of the flow rate of gases, historically natural gas and nitrogen, but now we excel in hydrogen and CO2. Our technology is designed and built in Scotland, with over 100 years of experience within our team. With less than 1 bar pressure-loss, and no moving parts, our latest product Hy-Cone™, is designed specifically for Hydrogen. The low-pressure loss across Hy-Cone™ maximises hydrogen throughput in vehicle fueling applications. For electrolyser applications, these devices monitor hydrogen output rates, maintaining maximum electrolyser efficiency over time.
Latest products
Browse the Hyfindr Digital Ecosystem
Hyfindr
B2B Suppliers
Hyfindr
Tech Videos
Hyfindr
Tech Knowledge
Hyfindr
Tech Advisory
Hyfindr
Tech Community