Modular Hydrogen Dryer for AEM Electrolysers – HXD-V1 (99.999%, available to order)

A 19-inch rack-mount twin-tower dryer that takes water-saturated hydrogen from up to five HXB-V1 2 kW systems to 99.999% purity. Available to order; ships eight weeks after order confirmation.

Compare
Bookmark Add to list

HXD-V1 — a modular hydrogen dryer for AEM electrolysers

Hydrogen leaving an electrolyser is saturated with water, and water is most of what a purity figure measures. HXD-V1 removes that moisture to reach 99.999% purity. One unit serves up to five HXB-V1 2 kW systems (2.5 Nm³/h, a 10 kW class of electrolysis).

Availability: available to order; ships eight weeks after order confirmation. The image is a 3D design rendering.

Performance (design)

  • Purity after drying: 99.999%
  • Dew point: ≤ −65 °C at atmospheric pressure (about 5 ppm water)
  • Maximum flow: 2.5 Nm³/h (5 × HXB-V1)
  • Operating pressure: 10 barg standard; up to 35 barg on request
  • Required inlet pressure: min. 10 barg
  • Regeneration hydrogen loss: approx. 90 NL/h, regardless of unit count

Construction

  • Regeneration: twin-tower alternating, heater purge; factory cycle 12 h (heating 6 h), user-adjustable
  • Adsorbent: sealed, no replacement required
  • Form factor: 19″ rack mount, 6U; 482 × 650 × 266 mm (W × D × H)

Utility, safety and interfaces

  • Power: AC 200–240 V, single-phase, 50/60 Hz, IEC C14 inlet; approx. 300 W max during regeneration heating
  • Safety functions: relief valve, overheat trip, leak sensor
  • H₂ inlet / outlet: 1/4″ tube bulkhead
  • Communication: Modbus TCP, MQTT/JSON; Wi-Fi OTA firmware update

Supply boundary

Dryer unit. Piping and installation are a separate scope of supply. Price and delivery for a specific order: on request.

Dew point is stated at atmospheric pressure at the dryer outlet. If you need a figure at line pressure or at your point of use, tell us the condition and we will convert it.

Full product page, datasheet and test conditions: hydroxpand.com/en/components/parts/hydrogen-dryer/

HydroXpand Inc.

HydroXpand designs and builds AEM water electrolysis hardware in Korea, from the electrode up: iridium-free NiFe anodes, low-PGM cathodes, research cells, the HXS-2 2 kW stack, the HXS-30 30 kW stack and the HXB-V1 2 kW integrated system. More than 70 customers in 14 countries. Founded in 2023 by three KAIST PhDs.

Our HXS-2 stack has logged more than 3,000 hours of operation. The HXD-V1 hydrogen dryer is available to order now, shipping eight weeks after order confirmation.

Send us your target output and operating conditions, and we will reply with a configuration and quote. Datasheets and measured data: hydroxpand.com

Latest products