Fuel Cell Stack Monitoring Device KiloLoad ZL800-10EW

Kolibrik.net

  • Fuel cell zero-voltage load for high power fuel cells
  • Fuel cell stack monitoring enables EIS measurement in sink mode up to 100kHz
  • True zero-voltage load
  • Fully digital control and acquisition
  • Programmable sequence of acquisition methods

Add to compare

Kolibrik Fuel Cell Stack Monitoring Device KiloLoad ZL800-10EW

  • KiloLoad is a system for testing and EIS measurements of automotive-grade cells (e.g. 500 cm2) with currents up to 2 kA, AC current for EIS up to 50 A. KiloLoad ZL800-10EW is a new range of high-power hydrogen fuel-cell zero-voltage loads equipped with impedance spectroscopy analyzer. This system is primarily designed for use with high-power hydrogen fuel cells and short stacks capable of supplying hundreds of amperes or even more than one kiloampere. KiloLoad allows to sink high current even with true zero voltage on its terminals – including short-circuit. KiloLoad models are available with maximum current of 200 A up to 2 kA.
  • Electrochemical Impedance Spectroscopy (EIS) measurements are realized in sink mode, so AC amplitude must be lower than the DC current. Sum of the DC current and AC amplitude must be below maximum rated current of device. The maximum amplitude of the AC component depends on the frequency and impedance of the fuel cell and connecting cables.
  • EIS module is capable to generate and measure frequencies up to 1 MHz, it has high sensitivity and load high-power path is made to have lowest possible inductance and skin effect. Device is equipped with precise low-inductance and low-skin-effect current sense resistor, internally calibrated with high-precision hall-effect sensor.

Example configuration

  • Input +/-10 V, sink up to 800 A
  • Power up to 4 kW, water cooling
  • Can work as true zero-voltage load for low-voltage sources (e.g. single H2 fuel cell)
  • Impedance spectroscopy up to 250 kHz, amplitude up to 50 A

Variants (examples)

  • ZL400-10W - Zero-voltage Load 10V/400A max 2kW, water cooling without EIS
  • ZL400-10EW - Zero-voltage Load 10V/400A max 2kW, water cooling with EIS
  • ZL1000-10W - Zero-voltage Load 10V/1000A max 5kW, water cooling without EIS
  • ZL1000-10EW - Zero-voltage Load 10V/1000A max 5kW, water cooling with EIS

KiloLoad ZL800-10EW block diagram

Kolibrik KiloLoad ZL800-10EW block diagram  

Contact us!

  • Kolibrik has the right fuel cell stack monitoring devices. Contact them by filling out the contact vendor form.
Brand Kolibrik.net
Type of Cooling Water
Min Current (in A) 1
Max Power (in kW) 4
Max Input Voltage (in V) 10
Max Current (in A) 1000
Electronic Control Interface USB 2.0
EIS frequency 1
Accuracy (in %) 0.1
Ingress Protection Rating IP20
Kolibrik.net

Kolibrik.net provides solutions and products mainly for H2FC technologies and electrochemistry. The electronics and software made by Kolibrik.net can cover many tasks ranging from basic and applied research, high-power cell and stack testing, stack control system prototyping to target application solutions. All products presented are on modular platform so they can be modified according to exact needs or parameters.

99% of all inquiries get answered within 5 days. Your inquiry will be sent immediately to the right person within the vendor organisation.

Latest products

Browse the Hyfindr Digital Ecosystem

Suppliers icon
Hyfindr
B2B Suppliers
Forum icon
Hyfindr
Tech Videos
Assignment icon
Hyfindr
Tech Knowledge
Thumb up icon
Hyfindr
Tech Advisory
Group icon
Hyfindr
Tech Community