Name: Standard Pressure Transmitter - PMP-S222-H
Availability: InStock

Components expand_more

Aftercoolers

Blowers expand_more

Cathode Blowers Hydrogen Blowers

Breakaways Cell Voltage Monitors Compressor Crankcase Compressor Head

Connectors expand_more

Electrical Connectors Hydrogen Discharge Connectors

Control Units expand_more

Battery Management System Power Management Modules

Converters Couplings Current Density Meters Customised Plastic Parts Diaphragms

Dryers expand_more

Air Dryers Hydrogen Dryers

Electrolyser Cells

Electrolyser Stacks expand_more

AEM Electrolysis Stacks Alkaline Electrolysis Stacks PEM Electrolysis Stacks SOEC Stacks

Electrolytes expand_more

Solid Oxide Electrolytes

Foils Fuel Cell Air Compressors

Fuel Cell Filters expand_more

Cathode Filters Coolant Filters Hydrogen Filters Ion Exchange Filters Silencers

Fuel Cell Humidifiers Fuel Cell Plates Fuel Cell Stack Modules

Fuel Cell Stacks expand_more

PEM Stacks SOFC Stacks

Gas Handling Units Gaskets

Gauges expand_more

Pressure Gauges

Heat Exchangers expand_more

Double Pipe Heat Exchanger Finned Tube Heat Exchangers Plate Heat Exchanger Printed Circuit Heat Exchanger Shell and Tube Heat Exchangers

Hydrogen Defueling Nozzles Hydrogen Fittings Hydrogen Flow Controllers

Hydrogen Flow Meter expand_more

Paddle Wheel Flow Meter

Hydrogen Fueling Nozzles Hydrogen Gas Boosters Hydrogen Hoses Hydrogen Pumps Hydrogen Refueling Data Interfaces Hydrogen Tank Liners

Hydrogen Tanks expand_more

Gaseous Hydrogen Tanks

Inverters IoT Telemetry Device Laminates & Coating

Level Indicators expand_more

Hydrogen Level Indicators Water Level Indicators

Membranes expand_more

Electrolyser Membranes Fuel Cell Membranes

Pipes Potentiostat Power Electronics Pressure Relief Devices Receptacles Seals

Sensors expand_more

Conductivity Sensors Flame Detectors Hydrogen Detectors Mass Flow Sensors Pressure Sensors Temperature Sensors

Separators expand_more

Water Separators

Switches expand_more

Level Switches Power Switches Pressure Switches

Thermocouples Transducers

Transmitters expand_more

Moisture Transmitters Oxygen Transmitters Pressure Transmitters Temperature Transmitters Thermal Conductivity Transmitters

Tube Connections Tubes Ultracapacitors Valve Manifold

Valves expand_more

Air Actuated Valves Air Flow Control Valves Angle Seat Valves Ball Valves Butterfly Valves Cathode Isolation Valves Check Valves Control Valves Cryogenic Valves Diaphragm Valves Flow Control Valves Globe Valves Hydrogen Back Pressure Regulators Hydrogen Filter Regulators Hydrogen Fuel Cell Pressure Regulators Hydrogen Pressure Reducing Valves Hydrogen Pressure Relief Valves Hydrogen Pressure Solenoid Valves Hydrogen Tank Valves Needle Valves On Tank Valves Plunger Valves Process Automation Solenoid Valves Proportional Valves Safety Valves Shut-Off Valves

Equipment expand_more

Bipolar Plates Manufacturing Electrolyser Test Equipment Fuel Cell Assembly Lines Fuel Cell Packing Systems Fuel Cell Test Equipment Hydrogen Component Test Equipment Hydrogen Leak Detectors Hydrogen Tank Test Equipment

Measuring Devices expand_more

Fuel Cell Stack Measuring Device

Tool Boxes

Systems expand_more

Automation Systems Deoxygenation Systems

Electrolysers expand_more

AEM Electrolysers Alkaline Electrolysers PEM Electrolysers

Energy Generators Fuel Cell Exhaust Air Systems Fuel Cell Systems

Hydrogen Compression Systems expand_more

Diaphragm Compressors Hydrogen Piston Compressors

Hydrogen Cooling Systems Hydrogen Dispensers Hydrogen Generators Hydrogen Power Generators Hydrogen Refueling Modules Hydrogen Refueling Stations Hydrogen Refueling Trailers Hydrogen Storage Systems Hydrogen Treatment Systems Nitrogen Generators

Powertrains expand_more

Fuel Cell Powertrain

System Cabinets expand_more

Fuel Cell Cabinets

System Cases expand_more

Fuel Cell Cases

Services expand_more

Consulting Services expand_more

Strategic Consulting

Development Services expand_more

Bipolar Plate Design Services Electronics Development Fuel Cell Modelling Fuel Cell System Design Fuel Cell System Integration Fuel Cell System Simulation Hydrogen Infrastructure Development

Engineering Services Fire and Gas Mapping Services

Production Services expand_more

Technology and Plant

Project Management Renting Services

Safety Services expand_more

Process Safety Engineering

Software expand_more

Control Software Development Plant Design Software System Design Software

Testing Services expand_more

Components Testing Electronics Testing Fuel Cell Systems Testing Hydrogen Systems Testing Material Testing Powertrain Testing Shaker Testing

Training Services

Materials expand_more

Catalysts Coatings Compounds Electrodes Mesophase Pitch Purification Materials

Sealants expand_more

Thread Sealants

by Country expand_more

Albania Algeria Andorra Argentina Australia Austria Bahrain Belarus Belgium Bolivia Brazil Brunei Bulgaria Cameroon Canada Chile China Colombia Costa Rica Croatia Cyprus Czechia Denmark Ecuador Egypt Estonia Finland France Georgia Germany Gibraltar Greece Grenada Hong Kong SAR China Hungary Iceland India Indonesia Ireland Israel Italy Japan Jordan Kazakhstan Latvia Liechtenstein Lithuania Luxembourg Madagascar Malaysia Malta Mexico Moldova Monaco Montenegro Morocco Netherlands New Zealand Nicaragua Nigeria Norway Oman Pakistan Panama Paraguay Peru Philippines Poland Portugal Puerto Rico Qatar Romania Saudi Arabia Serbia Singapore Slovakia Slovenia South Africa South Korea Spain Sri Lanka Sweden Switzerland Taiwan Thailand Tunisia Türkiye Ukraine United Arab Emirates United Kingdom United States Uruguay Venezuela Vietnam

Brands Register products

Standard Pressure Transmitter - PMP-S222-H

The piezoresistive, very compact pressure transmitters from SPT-Family (without oil reservoir) is based on a new type of two-chip technology (P2P Technology - our patented development), which enables the highest demands on robustness and performance such as stability, vibration, and shock resistance.

It was specially designed for OEM series use in harsh environmental conditions, such as those that prevail in the off-road sector (Vehicles and Machines in Construction, Mining, Farming, Military etc).

Compared to conventional machine building, the field of mobile equipment has more demanding requirements, particularly with regard to resistance to overpressure, vibration and shock, as well as increased EMC performance.

The pressure sensors PMP-S222-H were specially optimized for this and are therefore a robust solution for one of the sensor types most frequently used in mobile equipment.

All manufacturing steps from packaging in modern clean rooms to final calibration take place in Prignitz Mikrosystemtechnik in Germany.

Patented P2P technology

For high pressures and harsh environments, steel diaphragms have proven themselves in pressure sensor technology.

The most reliable measuring principles on steel diaphragms use so-called thin film technologies or alternatively strain gage technologies. The latter are characterized by significantly higher raw signals compared to thin film technology.

Prignitz Mikrosystemtechnik uses both measurement methods. With the P2P technology Prignitz Mikrosystemtechnik has developed a unique, patented Technology that belongs to the strain gauge technologies.

The decisive and innovative difference to the competition is the use of two full bridges, which are interconnected in such a way that undesirable external force influences on the sensor signal (e.g. torques during installation) are largely compensated.

A monolithic steel body without any welding is used for this purpose.

Only one part made of solid 316L stainless steel comes into contact with the medium. As a result, this technology can also be used for hydrogen applications.

Advantages of P2P technology:

Pressure ranges from 4 bar to 1.000 bar
Accuracy: 0,5% or better
Made entirely of 316L stainless steel, no internal welding, no internal seals
T-Range: -40°C … +125°C
Customized solutions
Very high robustness against external forces

Product key features

Very rugged standard pressure transmitters for hydrogen applications

Compact design

High integration density

High media resistance

No internal seals

Without weld seam

Diagnostic function based on the output signal (optional)

Customization possible

Pressure ranges: from 10 bar to 900 bar

Mechanical connections:

G1/4'A Form E, DIN EN ISO1179-2;
1/4'-18 NPT;
7/16-20 UNF SAE J514

Electrical connections: M12x1 (S763-4) (plastic), Packard Metri-Pack, DEUTSCH DT 04-3P, DEUTSCH DT 04-4P, AMP Superseal

Wetted parts: stainless steel 1.4404 (316L)

Response time: typ. 1 ms

Accuracy: ≤ 0.5 % FS limit-point settings at 25 °C

Optionally certificate: EX protection (ATEX, IECEx, CSA); up to 600 bar [9000psi], EC 79/2009 Hydrogen approval

Browse the Hyfindr Digital Ecosystem

Hyfindr

B2B Suppliers

Hyfindr

Tech Videos

Hyfindr

Tech Knowledge

Hyfindr

Tech Advisory

Hyfindr

Tech Community

Brand	PRIGNITZ Mikrosystemtechnik
Max Pressure (in bar)	900
Min Pressure (in bar)	10
Max Input Voltage (in V)	32
Min Input Voltage (in V)	7
Compliant with	CE, EC79, RoHS, UKCA
Max Ambient Temperature (in °C)	105
Min Ambient Temperature (in °C)	-40

Standard Pressure Transmitter - PMP-S222-H