Proof Pressure Test Stand for Hydrogen Composite Pressure Vessels

MAXIMATOR VETEQ GmbH

  • Proof pressure test for vessels up to 600L with test pressure up to 1,050 bar
  • Cycle time about 10-180min. (depending on vessel volume)
  • Fully automatic process with swivel fixture
  • Loading either manually or automatic
  • 100% water as test fluid
  • Including filling, pressurization and draining process

Add to compare

Proof Pressure Test Stand for Hydrogen Composite Pressure Vessels

  • The use case of the Maximator VETEQ proof pressure test stand is the proof test at the end of the production process of hydrogen composite pressure vessels.
  • National and international regulations as well as customer specifications mandate end-of-line proof pressure testing to ensure strength and safety of every vessel.
  • The proof test is performed with water and includes an automatic filling and draining process. Moreover, the required expansion measurement is performed with an intelligent scaling process which is CGA approved.
  • The Maximator VETEQ proof pressure test stand is divided into 3 sizes to fit all commonly produced vessel sizes.
  • Based on the vessel dimensions and later application, customers can configure the proven modular design in the sizes S, M or L. The chart afterwards shows the delimitations between these 3 different sizes.
[video width='1920' height='1080' m4v='https://hyfindr.com/wp-content/uploads/2023/09/Maximator-Veteq-Tank-video.m4v'][/video]  

Key features

  • Each module can also be purchased separately (e.g. burst test chamber)
  • Test sample volume: up to 900L
  • Test sample pressure: 350bar or 700bar
  • Test sample length: up to 4,000mm
  • Test sample diameter: up to 1,000mm
  • Test pressure: up to 2,500bar
  • Fluid: Water
  • Handling: manual

Applications

  • Manufacturing of hydrogen composite pressure vessels
  • End of line testing

Use cases

  • Serial production of hydrogen composite pressure vessels
  • Pilot line for production of hydrogen composite pressure vessels
Hydrogen tank leak test stand - Use cases

Contact us

  • Maximator VETEQ is the specialist for automated testing systems for serial vessel testing. Interested? Please contact Maximator VETEQ by filling in the contact vendor form.
Brand Maximator VETEQ
Max Pressure (in bar) 1050
Volume Water equival. (in L) 900
Diameter (in mm) 1000
MAXIMATOR VETEQ GmbH

Maximator VETEQ, founded in 2022, is focused on “Vessel Test Equipment” especially for hydrogen storage system within automotive sector. A key for the hydrogen mobility is the much lightweight solution as well as much higher range of the vehicles. To reach this range as much as possible hydrogen needs to be transported on the vehicle. An increase of hydrogen on-board is possible by using high pressure up to 700 bar within the hydrogen composite pressure vessels. Such high pressure requires high quality and safety standards. Maximator VETEQ is the specialist for automated testing systems for serial vessel testing, customized to the requirements of our customers, ensuring that the tested vessels fulfill these high quality and safety requirements.

99% of all inquiries get answered within 5 days. Your inquiry will be sent immediately to the right person within the vendor organisation.

Latest products

Browse the Hyfindr Digital Ecosystem

Forum icon
Hyfindr
Tech Videos
Assignment icon
Hyfindr
Tech Knowledge
Thumb up icon
Hyfindr
Tech Advisory
Group icon
Hyfindr
Tech Community