Air Actuated Valves
Air Flow Control Valves
Angle Seat Valves
Ball Valves
Butterfly Valves
Cathode Isolation Valves
Check Valves
Coaxial Valves
Control Valves
Cryogenic Valves
Diaphragm Valves
Flow Control Valves
Globe Valves
Hydrogen Back Pressure Regulators
Hydrogen Filter Regulators
Hydrogen Fuel Cell Pressure Regulators
Hydrogen Pressure Reducing Valves
Hydrogen Pressure Relief Valves
Hydrogen Pressure Solenoid Valves
Hydrogen Tank Valves
Needle Valves
On Tank Valves
Plunger Valves
Process Automation Solenoid Valves
Proportional Valves
Safety Valves
Shut-Off Valves
H-Drive System Module - HSM X1
- Dual-Stage Hydrogen Compression using Haskel H-Drive hydraulic piston compressors
- Certified for use in Ex II 3G IIC environments
- High Ingress Protection (IP66) for robust outdoor or industrial operation
- Skid-mounted, two-piece design for ease of installation
- Passive Cooling System with heater integration for cold environments
H-Drive System Module - HSM X1
- It is a high-pressure hydrogen compression solution designed for system integrators and equipment builders.
- Engineered with two hydraulically driven Haskel H-Drive compressors, the HSM delivers a two-stage compression process for gaseous hydrogen.
- It is designed for hazardous environments (Ex II 3G IIC), the system integrates safety instruments, control systems, heat exchangers, and piping which is all pre-configured on a compact two-piece skid.
- The HSM X1 can be configured to supply outlet pressures of either 500 bar or 950 bar, supporting a wide range of hydrogen fueling and storage applications.
- While it provides core compression capabilities, additional modules are required for cooling, electrical supply, and centralized control to complete a fully operational hydrogen fueling system.
Key features
- Dual-Stage Hydrogen Compression using Haskel H-Drive hydraulic piston compressors
- Certified for use in Ex II 3G IIC environments
- Up to 500 or 950 bar outlet pressure
- Skid-mounted, two-piece design for ease of installation
- HMI, ESTOP, OPC-UA, and local fault reset
- Up to 106 kg H₂/hr at 500 bar
- Passive Cooling System with heater integration for cold environments
- High Ingress Protection (IP66) for robust outdoor or industrial operation
- Dimensions of 2170 mm (W) x 3800 mm (D) x 2400 mm (H)
Technical specifications
- Max ambient humidity: EN60204 - 4.4.4 Humidity The electrical equipment shall be capable of operating correctly when the relative humidity does not exceed 50 % at a maximum temperature of +40 °C. Higher relative humidities are permitted at lower temperatures (for example 90 % at 20 °C).
- Harmful effects of occasional condensation shall be avoided by design of the equipment or, where necessary, by additional measures (for example built-in heaters, air conditioners, drain holes).
- Note, heaters are fitted to each HPU enclosure
- Maximum output voltage
- Voltage: 230VAC, Output Voltage 24VDC
- Max mass flow (In g/s):
- 106 kg H2/hr (500bar model)
- 65kg H2/hr (950 bar model)
- Max Outlet Pressure (in bar): 500 bar or 950 bar depending on model
- Max pressure (In bar): 500 bar (inlet pressure)
- Min pressure (In bar): 15 bar (inlet)
Application areas
- Hydrogen Refueling Stations (HRS)
- Industrial Hydrogen Compression
Contact us
- Interested? Please contact the vendor by filling out the contact vendor form.
| Brand | Haskel |
| Fuel | Hydrogen |
| Max Pressure (in bar) | 500 |
| Min Pressure (in bar) | 15 |
| Ingress Protection Rating | IP66 |
Haskel
For 75 years and counting, Haskel has been recognized as the world’s leading provider of high-pressure industrial gas and liquid handling equipment. Haskel hydrogen technology is safely and successfully used in a range of mission critical applications around the world every day - just as it has been for over two decades. We manufacture a full range of hydrogen handling equipment, including compressors, hydraulic and pneumatic-driven gas boosters, high-pressure valves and fittings and other system components. All of which use specific materials designed for hydrogen use based on pressure and flow requirements to address embrittlement issues metals face when exposed to a hydrogen environment. As the world’s leading provider of high-pressure hydrogen solutions, we have a team of experts who will work with you to provide the best solution for your chosen application.
Latest products
Browse the Hyfindr Digital Ecosystem
Hyfindr
B2B Suppliers
Hyfindr
Tech Videos
Hyfindr
Tech Knowledge
Hyfindr
Tech Advisory
Hyfindr
Tech Community