Water Dissociator (Hydrogen and Oxygen Generator) - 35.0 1C

Idroenergy S.p.A.

Hydrogen and oxygen generation from water
Low-pressure gas production
Gas pre-drying with chiller unit
Internal liquid/water heat exchanger cooling
Electronic control with alphanumeric display and multilingual diagnostics
Network insulation transformer

The Water Dissociator is a medium-high capacity system designed to generate hydrogen and oxygen gases from water. It produces 23,200 liters per hour of hydrogen and 11,600 liters per hour of oxygen. The system operates within a pressure range of 3 to 6 bar. The unit has an electrical consumption of 126 kWh and a water consumption of 18.6 liters per hour. The system operates within an ambient temperature range of +5 to +35°C. The system is powered by a three-phase 400 V AC supply and operates at a frequency of 50/60 Hz. It consists of three main components: Production unit: 140 × 230 × 215 cm, 2,050 kg Control unit: 90 × 60 × 210 cm, 200 kg Transformer: 95 × 85 × 115 cm, 500 kg The hydrogen produced has a purity of over 99.5%, and the gas is pre-dried with a chiller unit, with a dew point up to 0°C. The system includes internal liquid/water heat exchanger cooling, auxiliary preheating for cold environments, a water reserve warning system, electronic control with an alphanumeric display and multilingual diagnostics, a network insulation transformer, and a remote control and monitoring system.

Use Cases

Thermal treatments
Large-sized brazing
Sintering and thermal treatment furnaces
Sintering and thermal treatment furnaces
Feeding automatic multi-station brazing systems

Capabilities

Generates hydrogen (23,200 l/h) and oxygen (11,600 l/h) from water
Operates within pressure range of 3–6 bar
Designed for high-capacity industrial operation (126 kW power)
Integrated liquid/water heat exchanger for cooling
Suitable for operation within +5 to +35°C ambient conditions
Supports remote monitoring and control

Idroenergy S.p.A. Idroenergy designs, manufactures, and installs systems for on-site production of high-purity hydrogen and nitrogen gases. The company provides engineering, installation, and after-sales services for industrial gas generation systems used in sectors such as metallurgy, renewable energy, and chemical processing.

First name

Last name

Company

Country

Quantity

Business e-mail

Message to vendor

I consent to the privacy policy and terms of use.*

This site is protected by reCAPTCHA and the Google privacy policy and terms of service apply.

Latest products

Fuel Cell Test Equipment MegaEIS™ ME-130L500x200 – High Current Load & EIS Workstation By Kolibrik.net

Featured

Gaseous Hydrogen Tanks Hydrogen Type 4 Cylinder 380 bar 350L By Faurecia Hydrogen Solutions

Featured

Gaseous Hydrogen Tanks Hydrogen Type 4 Cylinder 700 bar 251L By Faurecia Hydrogen Solutions

Gaseous Hydrogen Tanks Hydrogen Type 4 Cylinder 700 bar 218L By Faurecia Hydrogen Solutions

Fuel Cell Test Equipment MegaEIS™ ME-130L500x200 – High Current Load & EIS Workstation By Kolibrik.net

Fuel Cell Test Equipment MegaEIS™ ME-42L200x50 – High-Current Load & EIS Workstation By Kolibrik.net

Electrolyser Test Equipment MegaEIS™ ME-10S500x20 – High-Current Source & EIS Workstation By Kolibrik.net

Electrolyser Test Equipment MegaEIS™ ME-10S270x20 – High-Current Source & EIS Workstation By Kolibrik.net

Fuel Cell Test Equipment MegaEIS™ ME-514L400x800 – High-Current Load & EIS Workstation By Kolibrik.net

Fuel Cell Test Equipment MegaEIS™ ME-42L500x50 – High-Current Load & EIS Workstation By Kolibrik.net

Fuel Cell Test Equipment MegaEIS™ ME-130L2000x200 – High-Current Load & EIS Workstation By Kolibrik.net

Fuel Cell Test Equipment MegaEIS™ ME-42SL420x200 – Bi-Directional Workstation for Fuel Cells, Electrolyzers & Batteries By Kolibrik.net